I changed modem code to 5.12.18.16 and the FTTN 50/20 connection has been up for 31hrs. My NBN connections typically stay up for 1 to 4.5 days (ADSL2 despite being slower was so much more stable than NBN). if you open the web console (middle button on the top right next to the floppy disk symbol) and type vdsl status it will tell you the path mode and interleave.

Draytek Vigor 167 : r/draytek - Reddit Draytek Vigor 167 : r/draytek - Reddit

When running the tp link theres no noticeable line drops or anything, if anything its better – I think the draytek is being a bit too conservative.

I've been running one for the last 4-5 months, and been happy. It has been syncing well and seems to have been quite reliable. I got it to replace a box that apparently couldn't handle "SOS".

Vigor Router? - DrayTek How do I log into a Vigor Router? - DrayTek

Ideal partner device for DrayTek dual-WAN products or any other vendor's Ethernet WAN firewall. Reports DSL Line Status on DrayTek Vigor routers. The only means of running the second "router" ...with all devices on that having same network as the primary... is to disable the routing and DHCP functions, turning it into a switch. Any wifi features are tied to the switch so nothing to configure there.Overall, conformity has also been increased, with ITU-T G.992.1 ADSL G.dmt, G.992.3 ADSL2 G.dmt.bis, G.992.5 ADSL2 +, G.993.1 VDSL, G.993.2 VDSL2, G.993.5 vectoring, G.997.1 supported.

Vigor167 | DrayTek Vigor167 | DrayTek

Vigor167 product news 9-april-2021 In German, but (basic) translation below: https://www.draytek.de/aktuelle-news-lesen/items/vigor167-neu-annexa-telekom-testcenter-annexb-modem-supervectoring.html NBN recommends to use the NBN supplied modem which does provide power to the DPU to interface your broadband router to FTTC.It should also be noted that with regard to ADSL, both the variants Annex-A and Annex-B are combined in one device for the first time, which also further increases the possibilities for using the modem. So your OPenWRT router is a client to the Draytek on one of the LAN ports. SO Draytek allocates and routes to it via LAN1.

Draytek Vigor 166 - BT Community Solved: Draytek Vigor 166 - BT Community

Yes I tried it connected directly to my PC ,Not sure how to set up a static IP, but I'll have a google about that.Can i ask what MTU yours set? Also did you make ANY changes at all to your settings when connecting this up? It also is not necessary. Any client device on the OPenWRT should be able to reach the draytek interface as the OPenWRT ROUTES any request it cannot handle..upwards to the Draytek. The configuration and commissioning is, as is already well known from the Vigor160 series, very simple and intuitive and does not present the user with any unnecessary challenges so that the modem can start operating in the shortest possible time. On the plus side it does work fine in bridge mode giving the same speed as my BT HH on an older router (I've sent off for a new faster one)